Impact of Changing Traffic Characteristics and Environmental Conditions on Flexible Pavements
Abstract
Although the trend for the next generation of pavement design methods is shifting to mechanistic design, the use of design methods based on the AASHO road test results is still the current design practice in Texas and some other states. Critical to these design methods are the AASHTO load equivalency factors (LEFs), which are used to convert the mixed traffic axle loads into standard 18-kip (80.1-kN) equivalent single-axle loads. Several studies have been conducted on the subject of load equivalency for pavement design and analysis. However, there remain uncertainties related to various issues of load equivalency. Over the years, the composition and characteristics of traffic using Texas highways have been changing. The North American Free Trade Agreement has accelerated such changes in that more trucks, primarily moving among mid-western states, Texas, and Mexico, are traveling on Texas highways. In addition, the original AASHO road test was conducted at a site with environmental conditions significantly different from the environmental conditions in Texas. It is therefore critical to understand fully the impact of such changing traffic characteristics and environmental conditions on pavements in Texas. Presented is the methodology used to analyze the impact of these factors on the AASHTO LEFs.
Get full access to this article
View all access and purchase options for this article.
References
1. Guide for Pavement Structures, Vol. 1. AASHTO, Washington, D.C., 1986.
2. Southgate H. F. An Analytical Investigation of AASHTO Load Equivalencies. Interim Report KTC-93-1. Kentucky Transportation Center, Kentucky University, Lexington, KY; Kentucky Transportation Cabinet, Frankfurt, KY; FHWA, U.S. Department of Transportation, 1993.
3. Zaghloul S. M., White T. D., and Kuczek T. Use Of Three-Dimensional, Dynamic, Nonlinear Analysis to Develop Load Equivalency Factors for Composite Pavements. In Transportation Research Record 1449, TRB, National Research Council, Washington, D.C., 1994, pp. 199–208.
4. Zaghloul S. M., White T. D., and Kuczek T. Evaluation of Heavy Load Damage Effect on Concrete Pavements Using Three-Dimensional, Nonlinear Dynamic Analysis. In Transportation Research Record 1449, TRB, National Research Council, Washington, D.C., 1994, pp. 123–133.
5. Ioannides A. M., and Khazanovich L. Load Equivalency Concepts: A Mechanistic Reappraisal. In Transportation Research Record 1388, TRB, National Research Council, Washington, D.C., 1993, pp. 42–51.
6. Ioannides A. M. Theoretical Implications of the AASHTO 1986 Nondestructive Testing Method 2 for Pavement Evaluation. In Transportation Research Record 1307, TRB, National Research Council, Washington, D.C., 1991, pp. 211–220.
7. Papagiannakis T., Oancea A., Ali N., and Chan J. Heavy Vehicle Equivalence Factors from In-Situ Pavement Strains. Proc., 1990 Annual Conference of the Roads and Transportation Association of Canada, Vol. 1, St. John's, Newfoundland, Canada, 1990.
8. Seeds S. B., and Medus L. M. Rigorous Application of Linear Damage Concepts in Development of Improved Flexible Pavement Performance Models. In Transportation Research Record 1207, TRB, National Research Council, Washington, D.C., 1988, pp. 121–133.
9. High R., Hudson S. W., and Seeds S. B. Evaluation of Increased Pavement Loading. Volume II—Computer Program Documentation. Final Report. FHWA-AZ88-219, II. ARE Inc., Austin, TX; Arizona Department of Transportation, Phoenix, AZ; FHWA, U.S. Department of Transportation, 1988.
10. Horak E. Application of Equivalent-Layer-Thickness Concept in a Mechanistic Rehabilitation Design Procedure. In Transportation Research Record 1207, TRB, National Research Council, Washington, D.C., 1988, pp. 69–75.
11. Hudson S. W., Seeds S. B., Finn F. N., and Carmichael R. F. III. Evaluation of Increased Pavement Loading. Volume I—Research Results and Findings. Final Report, FHWA-AZ88-219, I. ARE Inc., Austin, TX.; Arizona Department of Transportation, Phoenix, AZ; FHWA, U.S. Department of Transportation, 1988.
12. Huhtala M., and Pihlajamaeki J. New Concepts on Load Equivalency Measurements. Proc., 7th International Conference on Asphalt Pavements, Vol. 3, Design and Performance, 1992.
13. Fernando E., and Lytton R. A System for Evaluating the Impact of Truck Characteristics and Use on Flexible Pavement Performance and Life-Cycle Costs. Proc., 7th International Conference on Asphalt Pavements, Vol. 3, Design and Performance, 1992.
14. Kenis W., Kulakowski B., and Streit D. Heavy Vehicle Pavement Loading: A Comprehensive Testing Programme. Heavy Vehicles and Roads: Technology, Safety and Policy. Proc., 3rd International Symposium on Heavy Vehicle Weights and Dimensions, Cambridge, U.K., 1992.
15. Southgate H. F. Comparison of Rigid Pavement Thickness Design Systems. Final Report UKTRP-88-14. Kentucky Transportation Center, Kentucky University, Lexington, KY; Kentucky Transportation Cabinet, Frankfurt, KY; FHWA, U.S. Department of Transportation, 1991.
16. Hajek J. J. General Axle Load Equivalency Factors. In Transportation Research Record 1482, TRB, National Research Council, Washington, D.C., 1995, pp. 67–78.
17. Sebaaly P. E., and Tabatabaee N. Effect of Tire Parameters on Pavement Damage and Load-Equivalency Factors. Journal of Transportation Engineering, Vol. 118, No. 6, 1992, pp. 805–819.
18. Black K., and Kenis W. The FHWA Test Road: Construction and Instrumentation. Public Roads, Vol. 56, No. 1, 1992, pp. 32–39.
19. Bonaquist R. F., Churilla C. J., and Freund D. M. Effect of Load, Tire Pressure, and Tire Type on Flexible Pavement Response. In Transportation Research Record 1207, TRB, National Research Council, Washington, D.C., 1988, pp. 207–216.
20. Bonaquist R., Churilla C., and Freund D. Effect of Load, Tire Pressure, and Tire Type on Flexible Pavement Response. Public Roads, Vol. 52, No. 1, 1988, pp. 1–7.
21. Huhtala M., Pihlajamaaki J., and Miettinen V. The Effect of Wide-Based Tyres on Pavements. Heavy Vehicles and Roads: Technology, Safety and Policy. Proc., 3rd International Symposium on Heavy Vehicle Weights and Dimensions, Cambridge, U.K., 1992.
22. Heavy Trucks, Climate and Pavement Damage. Report FF140. OECD Scientific Experts Group, Organization for Economic Cooperation and Development, Paris, France, 1988.
23. Rilett L. R., and Hutchinson B. G. LEF Estimation from Canroad Pavement Load-Deflection Data. In Transportation Research Record 1196, TRB, National Research Council, Washington, D.C., 1988, pp. 170–178.
24. Small K., Winston C., and Evans C. A. Road Work. The Brookings Institution, Washington, D.C., 1998.
25. Weissmann A. J., Hudson W. R., and McCullough B. F. Development of Procedures for Monitoring and Predicting the Long-Term Performance of Continuously Reinforced Concrete Pavements. Report 472-6. Center for Transportation Research, Blacksburg, Va., 1990.
26. Bury K. Statistical Models in Applied Science. John Wiley and Sons, Inc., New York, 1975.
27. Hudson S. W., Anderson V. L., Irick P. E., Carmichael R. F. III, and McCullough B. F. Impact of Truck Characteristics on Pavements: Truck Load Equivalency Factors. Final Report, FHWA-RD-91-064. ARE Inc., Austin, TX; FHWA, U.S. Department of Transportation, 1992.
28. Trapani R., and Scheffey C. Load Equivalency: Issues for Further Research. Public Roads, Vol. 53, No. 2, 1998, pp. 39–45.
29. Van Til C. J., McCullough B. A., and Varga B. A. NCHRP Report 12: Evaluation of AASHO Interim Guide for Design of Pavement Structures. TRB, National Research Council, Washington, D.C., 1972.
30. Guide for Design of Pavement Structures. AASHTO, Washington, D.C., 1993.
31. Product and Technical Information. Commercial Truck Tires. Goodyear Tire & Rubber Co., Akron, Ohio, 1997.
Cite article
Cite article
Cite article
OR
Download to reference manager
If you have citation software installed, you can download article citation data to the citation manager of your choice
Information, rights and permissions
Information
Published In
Article first published: January 2000
Issue published: January 2000
Authors
Metrics and citations
Metrics
Journals metrics
This article was published in Transportation Research Record: Journal of the Transportation Research Board.
VIEW ALL JOURNAL METRICSArticle usage*
Total views and downloads: 19
*Article usage tracking started in December 2016
Altmetric
See the impact this article is making through the number of times it’s been read, and the Altmetric Score.
Learn more about the Altmetric Scores
Articles citing this one
Receive email alerts when this article is cited
Web of Science: 0
Crossref: 9
- A Machine Learning Tool for Pavement Design and Analysis
- IRI Estimation Based on Pavement Distress Type, Density, and Severity:...
- Detecting Significant Changes in Traffic Patterns for Pavement Design
- Updating Traffic Inputs for Use in the Pavement Mechanistic-Empirical ...
- Incorporating Dynamic Traffic Distribution into Pavement Maintenance O...
- A Dynamic Traffic Assignment Model for the Sustainability of Pavement ...
- Highway-user fees for overweight trucks: Consequences of deviations fr...
- Principles of Ensuring Appropriate Driving Conditions on Motor Roads
- Kelių tampriosios dangos konstrukcijų savybių įtaka jų viršutinio sluo...
Figures and tables
Figures & Media
Tables
View Options
Get access
Access options
If you have access to journal content via a personal subscription, university, library, employer or society, select from the options below:
loading institutional access options
Alternatively, view purchase options below:
Purchase 24 hour online access to view and download content.
Access journal content via a DeepDyve subscription or find out more about this option.
