Influence of Cutout Geometry on Stresses at Welded Rib-to-Diaphragm Connections in Steel Orthotropic Bridge Decks
Abstract
The geometry of the cutout at the intersection of longitudinal ribs and transverse diaphragm plates in steel orthotropic bridge decks can have a significant impact on the stress in the region of the welded rib-to-diaphragm connections. Many different approaches to detailing this connection have been tried, with mixed success. To provide additional guidance to designers, a finite element parametric study that systematically investigated the effect of altering the geometry of certain variables was performed. Parameters considered included overall cutout shape, cutout depth, diaphragm plate thickness, and deck plate thickness. Results indicate that the suggested cutout geometry shown in the current (2002) AASHTO LRFD Bridge Design Specifications for closed-rib orthotropic bridge decks produces increased stresses on this fatigue-sensitive connection. An improved geometry is proposed to replace that currently presented in the specification. Results of this study indicate that larger cutout geometries offer less resistance to out-of-plane displacements induced by longitudinal rib rotations. As a result, out-of-plane stresses are decreased at the connection. However, cutouts that are excessively deep will increase in-plane stresses at the welded rib-to-diaphragm connection. If the cutout is too shallow, out-of-plane stresses may become prohibitively high owing to restraint of longitudinal rib rotations. Cutouts that are between 1/3 and 1/2 the depth of the rib with transition radii at the top of the cutout of 50 to 75 mm and vertical cuts are most favorable. The cutout geometry shown in the AASHTO LRFD specification results in an overstiff cutout detail. A proposed improved geometry is presented.
Get full access to this article
View all access and purchase options for this article.
References
1. Orthotropic Bridges—Theory and Design, 2nd ed. James F. Lincoln Arc Welding Foundation, Cleveland, Ohio, May 1987.
2. Leendertz J. S., and Kolstein M. H. The Behavior of Trough Stiffener to Crossbeam Connection in Orthotropic Steel Bridge Decks, HERON, Vol. 40, No. 3, 1995.
3. Design Manual for Orthotropic Steel Plate Deck Bridges. American Institute of Steel Construction, 1963.
4. Connor R. J. A Comparison of the In-Service Response of an Orthotropic Steel Deck with Laboratory Studies and Design Assumptions. Ph.D. dissertation, Department of Civil and Environmental Engineering, Lehigh University, Bethlehem, Pa., May 2002.
5. AASHTO LRFD Bridge Design Specifications, 2nd ed. Association of State Highway and Transportation Officials, Washington, D.C., 1998 (with 2001 interims).
6. Kaczinski M. R., Stokes F. E., Lugger P., and Fisher J. W. Williamsburg Bridge—Orthotropic Deck Fatigue Test, Phase I Final Report. ATLSS Report No. 97-04. Department of Civil and Environmental Engineering, Lehigh University, Bethlehem, Pa., Dec. 1997.
7. Connor R. J., and Fisher J. W. Results of Field Measurements on the Williamsburg Bridge Orthotropic Deck—Final Report. ATLSS Report No. 01-01. Department of Civil and Environmental Engineering, Lehigh University, Bethlehem, Pa., Jan. 2001.
8. Tsakopoulos P. A., and Fisher J. W. Williamsburg Bridge Replacement Orthotropic Deck As-Built Full-Scale Fatigue Test, Final Report on Phase 2B. ATLSS Report No. 99-02. Department of Civil and Environmental Engineering, Lehigh University, Bethlehem, Pa., May 1999.
9. Tsakopoulos P. A., and Fisher J. W. Fatigue Resistance Investigation for the Orthotropic Deck on the Bronx Whitestone Bridge—Final Report. ATLSS Report No. 02-05. Department of Civil and Environmental Engineering, Lehigh University, Bethlehem, Pa., Sept. 2002.
Cite article
Cite article
Cite article
OR
Download to reference manager
If you have citation software installed, you can download article citation data to the citation manager of your choice
Information, rights and permissions
Information
Published In
Article first published: January 2004
Issue published: January 2004
Authors
Metrics and citations
Metrics
Journals metrics
This article was published in Transportation Research Record: Journal of the Transportation Research Board.
VIEW ALL JOURNAL METRICSArticle usage*
Total views and downloads: 37
*Article usage tracking started in December 2016
Altmetric
See the impact this article is making through the number of times it’s been read, and the Altmetric Score.
Learn more about the Altmetric Scores
Articles citing this one
Receive email alerts when this article is cited
Web of Science: 0
Crossref: 25
- Fatigue evaluation and structural optimization of rib-to-diaphragm con...
- Machine learning-assisted fatigue performance optimization for cutout ...
- Fatigue tests and optimization for a new rib-to-diaphragm joint in ort...
- Fatigue test and failure mechanism of new rib-to-floorbeam welded join...
- Fatigue performance and optimal design of corrugated steel–concrete co...
- Fatigue Behavior of Rib-to-Floor Beam Junctions with Separate Inner St...
- Fatigue Optimization of Structural Parameters for Orthotropic Steel Br...
- Effect of Concrete Thickness on Fatigue Performance for rib-to-diaphra...
- Structural optimization of rib-to-crossbeam joint in orthotropic steel...
- Hot-spot stress models of cutout detail on orthotropic steel bridge de...
- Optimization of Truss Girders in Cable-Supported Bridges Including Sta...
- Fatigue behavior of orthotropic bridge decks with two types of cutout ...
- Parametric Optimization of Orthotropic Girders in a Cable-Supported Br...
- Fatigue cracking investigation on diaphragm cutout in a self-anchored ...
- Fatigue behavior of orthotropic steel bridge stiffened with ultra-high...
- Virtual Monitoring of orthotropic steel deck using bridge weigh-in-mot...
- Standardization and Optimization of Orthotropic steel deck with Numeri...
- Fatigue behaviour of orthotropic steel bridge decks with inner bulkhea...
- Behavior and Fatigue Performance of Details in an Orthotropic Steel Br...
- Experimental Study of Fatigue Crack Behavior of Rib-To-Rib Butt Welded...
- Fatigue Performance of a Lightweight Composite Bridge Deck with Open R...
- Research on rib-to-diaphragm welded connection by means of hot spot st...
- A State-of-the-Art Review on Fatigue Life Assessment of Steel Bridges
- Optimization of Design Details in Orthotropic Steel Decks Subjected to...
- Consistent Approach to Calculating Stresses for Fatigue Design of ...
Figures and tables
Figures & Media
Tables
View Options
Get access
Access options
If you have access to journal content via a personal subscription, university, library, employer or society, select from the options below:
loading institutional access options
Alternatively, view purchase options below:
Purchase 24 hour online access to view and download content.
Access journal content via a DeepDyve subscription or find out more about this option.
