Asphalt Cement Loss Tangent as Surrogate Performance Indicator for Control of Thermal Cracking
Abstract
This paper documents and discusses the field validation of a simple performance indicator for specification grading of asphalt cement for thermal cracking. The loss tangent, tan(δ), as defined by the ratio of the viscous over elastic modulus, G”/G’, is able to provide a quantitative measure of the sol and gel nature of asphalt cement. As such, tan(δ) relates closely to how well a material is able to relax stress and is therefore investigated as a surrogate performance indicator for thermal cracking. Asphalt cements from 20 contract sites in Ontario, Canada, were tested in torsion bar geometry to determine their viscoelastic properties. The findings show that tan(δ) was able to distinguish good from poor performers for this set of materials with 95% accuracy, which is a considerable improvement over the current bending beam rheometer protocol. In addition to the use of tan(δ), it is suggested that a measure of the critical strain tolerance in the ductile state could be included to provide a significantly improved performance grading method. Most of the worst performing contracts were found to contain zinc. The presence of this element suggests that the use of waste engine oils in asphalt production is likely widespread, since zinc is a universal additive in engine oil and is never found in straight asphalt cement
Get full access to this article
View all access and purchase options for this article.
References
1. Robertson W. D. Using the SHRP Specification to Select Asphalt Binders for Low Temperature Service. Proc., Canadian Technical Asphalt Association, Vol. 40, 1995, pp. 170–195.
2. Kandhal P. S., Dongré R., and Malone M. S. Prediction of Low-Temperature Cracking of Pennsylvania Project Using Superpave® Specifications. Journal of the Association of Asphalt Paving Technologists, Vol. 65, 1996, pp. 491–531.
3. Anderson K. O., Christison J., Bai B., Johnston C. D., Quinn T., and McCullough D. Temperature and Thermal Contraction Measurements as Related to the Development of Low Temperature Cracking on the Lamont Test Road. Proc., Canadian Technical Asphalt Association, Vol. 43, 1998, pp. 16–47.
4. Button J. W., and Hastings C. P. How Well Can New Binder Tests Predict Cracking? Proc., Canadian Technical Asphalt Association, Vol. 43, 1998, pp. 48–72.
5. Andriescu A., Iliuta S., Hesp S. A. M., and Youtcheff J. S. Essential and Plastic Works of Ductile Failure in Asphalt Binders and Mixtures. Proc., Canadian Technical Asphalt Association, Vol. 49, 2004, pp. 93–122.
6. Yee P., Aida B., Hesp S. A. M., Marks P., and Tam K. K. Analysis of Premature Low-Temperature Cracking in Three Ontario, Canada, Pavements. In Transportation Research Record: Journal of the Transportation Research Board, No. 1962, Transportation Research Board of the National Academies, Washington, D.C., 2006, pp. 44–51.
7. Hesp S. A. M., Soleimani A., Subramani S., Marks P., Philips T., Smith D., and Tam K. K. Asphalt Pavement Cracking: Analysis of Extraordinary Life Cycle Variability in Eastern and Northeastern Ontario. International Journal of Pavement Engineering, Vol. 10, No. 3, 2009, pp. 209–227.
8. Bahia H. U., Anderson D. A., and Christensen D. W. Bending Beam Rheometer. Journal of the Association of Asphalt Paving Technologists, Vol. 61, 1992, pp. 117–153.
9. Anderson D. A., Christensen D. W., Bahia H. U., Dongré R., Sharma M. G., Antle C. E., and Button J. Binder Characterization and Evaluation. Volume 3: Physical Characterization. Report SHRP-A-369. SHRP, National Research Council, Washington, D.C., 1994.
10. Anderson D. A., and Kennedy T. W. Development of SHRP Binder Specification. Journal of the Association of Asphalt Paving Technologists, Vol. 62, 1993, pp. 481–507.
11. Bahia H. U., and Anderson D. A. Development of the Bending Beam Rheometer. Physical Properties of Asphalt Cement Binders: ASTM STP 1241 (Hardin John C., ed.), American Society for Testing and Materials, Philadelphia, Pa. 1995, pp. 28–50.
12. Basu A., Marasteanu M. O., and Hesp S. A. M. Time-Temperature Superposition and Physical Hardening Effects in Low-Temperature Asphalt Binder Grading. In Transportation Research Record: Journal of the Transportation Research Board, No. 1829, Transportation Research Board of the National Academies, 2003, pp. 1–7.
13. LTPPBind Software, Version 2.1. FHWA, U.S. Department of Transportation, 1999.
14. Booij C. H., and Thoone G. P. J. Generalization of Kramers-Kronig Transforms and Some Approximations of Relations between Viscoelastic Quantities. Rheologica Acta, Vol. 21, 1992, pp. 15–24.
15. Marasteanu M. O., and Anderson D. A. Booij and Thoone Approximation and Bitumen Relaxation Spectrum Generation. Presented at Eurobitume Workshop 99—Performance Related Properties of Bituminous Binders, Luxembourg, 1999.
16. Alcoutlabi M., and Martinez-Vega J. J. Modeling of the Viscoelastic Behaviour of Amorphous Polymers by the Differential and Integration Fractional Method. Polymer, Vol. 44, 2003, pp. 7199–7208.
17. Baskin C. M. Proc., American Society for Testing and Materials, Part II, Vol. 35, 1935, pp. 576–579.
18. Shields B. P., and Anderson K. O. Some Aspects of Transverse Cracking in Asphalt Pavements. Proc., Canadian Technical Asphalt Association, Vol. 9, 1964, pp. 209–226.
19. Rader L. F., and Ochalek R. T. Proposed Method for Testing the Physical Properties of Asphalt Paving Mixtures at Low Temperatures. Symposium on the Science of Asphalt in Construction, Division of Petroleum Chemistry, American Chemical Society, Los Angeles, Calif., 1971, pp. D126–D135.
20. Hesp S. A. M., Terlouw T., and Vonk W. C. Low-Temperature Performance of SBS-Modified Asphalt. Journal of the Association of Asphalt Paving Technologists, Vol. 69, 2000, pp. 540–573.
21. Bodley T., Andriescu A., Hesp S. A. M., and Tam K. K. Comparison Between Binder and Hot Mix Asphalt Properties and Early Top-Down Wheel Path Cracking in a Northern Ontario Pavement Trial. Journal of the Association of Asphalt Paving Technologists, Vol. 76, 2007, pp. 345–390.
22. Zhao M. O., and Hesp S. A. M. Performance Grading of the Lamont, Alberta C-SHRP Pavement Trial Binders. International Journal of Pavement Engineering, Vol. 7, No. 3, 2006, pp. 199–211.
23. Soenen H., Ekblad J., Lu X., and Redelius P. Isothermal Hardening in Bitumen and in Asphalt Mix. Proc., Third Eurasphalt and Eurobitume Congress, Vienna, Austria, 2004.
24. Van de Ven M. F. C., and van Assen E. J. Review of the South African Bitumen Specification to Take Cognisance of Compositional Balance Relative to Long Term Behaviour. Report No. CR-96/034. Council for Scientific and Industrial Research, Pretoria, South Africa, 1996.
25. Isacsson U., and Zeng H. Cracking of Asphalt at Low Temperature as Related to Bitumen Rheology. Journal of Materials Science, Vol. 33, 1998, pp. 2165–2170.
26. Such C., Ballie M., Exmelin C., Lombardi B., Ramond G., and Simoncelli J-P. Etude de la fissuration par le haut des bétons bitumineux. (Reflective cracking of bituminous concrete.) Etudes et recharches des laboratories des ponts et chaussées, 1999.
27. Barth E. J. Asphalt Science and Technology. Gordon Breach Science Publishers, New York, 1962.
28. Traxler R. E., and Schweyer H. E. Increase in Viscosity of Asphalts with Time. Proc. American Society for Testing and Materials, Part II, Vol. 36, 1936, pp. 554–551.
29. Struik L. C. E. Physical Ageing in Amorphous Polymers and Other Materials. Elsevier, Amsterdam, Netherlands, 1978.
30. Hayner R. E. Process for Paving with Asphalt Containing Mineral Lubricating Oil Base Stock. United States Patent 5,911,817, June 15, 1999. www.freepatentsonline.com/5911817.html.
31. Collins J. H., and Jones G. R. Asphalt Composition and Method. United States Patent 6,074,469, June 13, 2000. www.freepatentsonline.com/6074469.html.
32. Kodrat I., Sohn D., and Hesp S. A. M. Comparison of Polyphosphoric Acid-Modified Asphalt Binders with Straight and Polymer-Modified Materials. In Transportation Research Record: Journal of the Transportation Research Board, No. 1998, Transportation Research Board of the National Academies, Washington, D.C., 2007, pp. 47–55.
33. Villanueva A., Ho S., and Zanzotto L. Asphalt Modification with Used Lubricating Oil. Canadian Journal of Civil Engineering, Vol. 35, No. 2, 2008, pp. 148–157.
Cite article
Cite article
Cite article
OR
Download to reference manager
If you have citation software installed, you can download article citation data to the citation manager of your choice
Information, rights and permissions
Information
Published In
Article first published online: January 1, 2009
Issue published: January 2009
Authors
Metrics and citations
Metrics
Journals metrics
This article was published in Transportation Research Record: Journal of the Transportation Research Board.
VIEW ALL JOURNAL METRICSArticle usage*
Total views and downloads: 87
*Article usage tracking started in December 2016
Altmetric
See the impact this article is making through the number of times it’s been read, and the Altmetric Score.
Learn more about the Altmetric Scores
Articles citing this one
Receive email alerts when this article is cited
Web of Science: 0
Crossref: 46
- Validation of empirical changes to asphalt specifications based on pha...
- Quantification of Recycled Engine Oil Bottoms in Asphalt Binder Using ...
- Lessons learned from 60 years of pavement trials in continental climat...
- On the use of empirical phase angle limits for the grading of asphalt ...
- Comparative study on the chemical and rheological properties of elasto...
- A Literature Review of Bitumen Aging: From Laboratory Procedures to Fi...
- Non-isothermal low-temperature reversible aging of commercial wax-base...
- The Effects of Using Waste Engine Oil Bottom on Physical, Rheological ...
- On the Use of Empirical Phase Angle Limits for the Grading of Asphalt ...
- Validation of Empirical Changes to Asphalt Specifications Based on Pha...
- Enhanced Acceptance Specification of Asphalt Binder to Drive Sustainab...
- Improved performance grading of asphalt cement and hot mix asphalt in ...
- Large Amplitude Oscillatory Shear testing for the performance grading ...
- Effective control of flexible asphalt pavement cracking through qualit...
- Lessons Learned from 60 Years of Pavement Trials in Continental Climat...
- Variable-temperature Fourier-transform infrared spectroscopy study of ...
- Influence of thermal history on the intermediate and low-temperature r...
- Comparison of performance-based specification properties for asphalt b...
- Repeatability, reproducibility, and sensitivity assessments of thermal...
- Development of a Butt Joint Test for the ductile performance grading o...
- Determining re-refined engine oil bottom content in asphalt binders us...
- Using combined Avrami-Ozawa method to evaluate low-temperature reversi...
- Impact of Re-Refined Engine Oil Bottoms on Asphalt Binder Properties
- Comparison between thermal, rheological and failure properties for the...
- Influence of Waste Engine Oil Addition on the Properties of Zeolite-Fo...
- Oxidative and Thermoreversible Aging Effects on Performance-Based Rheo...
- Feasibility of Using XRF for Assessment of Surface Free Energy Compone...
- Laboratory Performance of Asphalt Mixtures Containing Re-Refined Engin...
- Performance grading of extracted and recovered asphalt cements
- Low-temperature reversible aging properties of coal liquefaction resid...
- Durability assessment of asphalt binder
- Methods for the Quantification of Recycled Engine Oil Bottoms in Perfo...
- Investigating the effectiveness of Vacuum Tower Bottoms for Asphalt Ru...
- Preliminary experience with improved asphalt cement specifications in ...
- Experimental and numerical investigation of low-temperature performanc...
- Analysis of Methods and Criteria for Evaluation of Bitumen Performance...
- Performance evaluation of REOB-modified asphalt binders and mixtures
- Effect of Polymer and Oil Modification on the Aging Susceptibility of ...
- Detection and Estimation of Re-Refined Engine Oil Bottoms in Asphalt B...
- Effect of Waste Engine Oil Residue on Quality and Durability of SHRP M...
- Toward Development of a New Thermal Cracking Test Using the Dynamic Sh...
- Quality and Durability of Warm Rubberized Asphalt Cement in Ontario, C...
- Properties of Recovered Asphalt Binder Blended with Waste Engine Oil: ...
- X-ray fluorescence detection of waste engine oil residue in asphalt an...
- Polyphosphoric Acid Modification of Asphalt
Figures and tables
Figures & Media
Tables
View Options
Get access
Access options
If you have access to journal content via a personal subscription, university, library, employer or society, select from the options below:
loading institutional access options
Alternatively, view purchase options below:
Purchase 24 hour online access to view and download content.
Access journal content via a DeepDyve subscription or find out more about this option.
