Skip to main content
Intended for healthcare professionals
Restricted access
Research article
First published online January 1, 2009

Performance of Polymer-Modified Asphalt Mixture with Reclaimed Asphalt Pavement

Abstract

Reclaimed asphalt pavement (RAP) mixtures have shown good resistance to rutting for hot-mix asphalt (HMA) pavement. Mixtures with polymer-modified binders such as styrene-butadiene-styrene (SBS) have also shown good performance against rutting and cracking. This paper presents the laboratory evaluations used to determine the rutting and cracking performance of the RAP mixtures with SBS polymer-modified binders as virgin binders. The asphalt pavement analyzer (APA) test and indirect tensile (IDT) test were conducted for the laboratory evaluation. The properties of SBS polymer-modified binders blended with recovered RAP binders were also investigated. The binder tests included G*/sinδ as the rutting parameter and G*sinδ as the cracking parameter of the Super-pave® PG grade system. The multiple stress creep and recovery test, which has recently received attention as an indicator of the rutting potential of polymer-modified asphalt binders, was also performed. RAP mixtures with SBS polymer-modified binders were fabricated containing different amounts of RAP materials: 0%, 15%, 25%, and 35%. From the APA and Superpave IDT tests, RAP mixtures with modified binders showed good performance regardless of the amounts of RAP materials in HMA. Even though the parameters, G*/sinδ and G*sinδ, and the percentage of recovery indicated the different amounts of RAP binders in polymer-modified binders, the relationship between these parameters and mixture performance was not clearly identified.

Get full access to this article

View all access and purchase options for this article.

References

1. Solaimanian M., and Tahmoressi M. Variability Analysis of Hot-Mix Asphalt Concrete Containing High Percentage of Reclaimed Asphalt Pavement. In Transportation Research Record 1543, TRB, National Research Council, Washington, D.C., 1996, pp. 88–96.
2. Kennedy T. W., Tam W. O., and Solaimanian M. Effect of Reclaimed Asphalt Pavement on Binder Properties Using the Superpave System. Publication Research Report 1205-1. Center for Transportation Research, Bureau of Engineering Research, University of Texas at Austin, 1998.
3. Lee K. W., Soupharath N., Shukla N., Franco C. A., and Manning F. J. Rheological and Mechanical Properties of Blended Asphalt Containing Recycled Asphalt Pavement Binders. Journal of Association of Asphalt Paving Technologists, Vol. 68, 1999, pp. 89–125.
4. Yildirim Y. Polymer-Modified Asphalt Binders. Construction and Building Materials, Vol. 21, 2007, pp. 66–72.
5. McDaniel R., and Shah A. Use of Reclaimed Asphalt Pavement (RAP) Under Superpave Specifications. Journal of the Association of Asphalt Paving Technologists, Vol. 72, 2003, pp. 226–252.
6. Cortě J.-F., Brosseaud Y., Simoncelli J.-P., and Caroff G. Investigation of Rutting of Asphalt Surface Layers: Influence of Binder and Axle Loading Configuration. In Transportation Research Record 1436, TRB, National Research Council, Washington, D.C., 1994, pp. 28–37.
7. Tia M., Roque R., Sirin O., and Kim H. Evaluation of Superpave Mixtures with and Without Polymer Modification by Means of Accelerated Pavement Testing. Publication Final Report FDOT BC-354. Florida Department of Transportation, Tallahassee, 2002.
8. Watson D. E. Updated Review of Stone Matrix Asphalt and Superpave® Projects. In Transportation Research Record: Journal of the Transportation Research Board, No. 1832, Transportation Research Board of the National Academies, Washington, D.C., 2003, pp. 217–223.
9. Kim S., and Sargand S. M. Performance Evaluation of Polymer-modified Superpave Mixes Using Laboratory Tests and Accelerated Pavement Load Facility. Second International Symposium on Maintenance and Rehabilitation of Pavements and Technological Control, National Center for Asphalt Technology, Auburn, Ala., 2001.
10. Von Quintus H. L., Mallela J., and Buncher M. S. Quantification of Effect of Polymer-Modified Asphalt on Flexible Pavement Performance. In Transportation Research Record: Journal of the Transportation Research Board, No. 2001, Transportation Research Board of the National Academies, Washington, D.C., 2007, pp. 141–154.
11. Mohammad L. N., Negulescu I. I., Wu Z., Daranga C., Daly W. H., and Abadie C. Investigation of the Use of Recycled Polymer-modified Asphalt Binder in Asphalt Concrete Pavements. Journal of the Association of Asphalt Paving Technologists, Vol. 72, 2003, pp. 551–594.
12. Huang B., Li G., Vukosavljevic D., Shu X., and Egan B. K. Laboratory Investigation of Mixing Hot-Mix Asphalt with Reclaimed Asphalt Pavement. In Transportation Research Record: Journal of the Transportation Research Board, No. 1929, Transportation Research Board of the National Academies, Washington D.C., 2005, pp. 37–45.
13. Standard Specifications for Road and Bridge Construction: Section 334 Superpave Asphalt Concrete and 916 Bituminous Materials. Florida Department of Transportation, Tallahassee, 2007.
14. Bahia H. U., Hanson D. I., Zeng M., Zhai H., Khatri M. A., and Anderson R. M. NCHRP Report 459: Characterization of Modified Asphalt Binders in Superpave Mix Design. TRB, National Research Council, Washington, D.C., 2001.
15. Shenoy A. Estimating the Unrecovered Strain During a Creep Recovery Test from the Material's Volumetric-Flow Rate (MVR). The International Journal of Pavement Engineering, Vol. 3, No. 1, 2002, pp. 29–34.
16. Delgadillo R. A., Cho D. W., and Bahia H. U. Nonlinearity of Repeated Creep and Recovery Binder Test and Relationship with Mixture Permanent Deformation. In Transportation Research Record: Journal of the Transportation Research Board, No. 1962, Transportation Research Board of the National Academies, Washington, D.C., 2006, pp. 3–11.
17. D'Angelo J. Modified Binders and Superpave Plus Specifications. FHWA. www.asphaltinstitute.org/upload/modified_binders_sp_plus_specification.pdf. Accessed May 20, 2008.
18. D'Angelo J. Creep and Recovery. Public Roads Magazine, March/April 2007. www.tfhrc.gov/pubrds/07mar/04.thm. Accessed May 23, 2008.
19. Awanti S. S., Amarnath M. S., and Veeraragavan A. Laboratory Evaluation of SBS Modified Bituminous Paving Mix. Journal of Materials in Civil Engineering, Vol. 20, No. 4, 2008, pp. 327–330.
20. Roque R., Buttlar W., Ruth B. E., Tia M., and Dickison S. W. Evaluation of SHRP Indirect Tension Tester to Mitigate Cracking in Asphalt Concrete Pavements and Overlays. Publication Final Report FDOT B-9885. Florida Department of Transportation, Tallahassee, 1997.
21. Zhang Z., Roque R., Birgisson B., and Sangpetngam B. Identification and Verification of a Suitable Crack Growth Law. Journal of the Association of Asphalt Paving Technologists, Vol. 70, 2001, pp. 206–241.
22. Roque R., Birgisson B., Drakos C., and Dietrich B. Development and Field Evaluation of Energy-Based Criteria for Top-Down Cracking Performance of Hot Mix Asphalt. Journal of the Association of Asphalt Paving Technologists, Vol. 73, 2004, pp. 229–255.
23. Kim B., Roque R., and Birgisson B. Effect of Styrene Butadiene Styrene Modifier on Cracking Resistance of Asphalt Mixture. In Transportation Research Record: Journal of the Transportation Research Board, No. 1829, Transportation Research Board of the National Academies, Washington, D.C., 2003, pp. 8–15.

Cite article

Cite article

Cite article

OR

Download to reference manager

If you have citation software installed, you can download article citation data to the citation manager of your choice

Share options

Share

Share this article

Share with email
EMAIL ARTICLE LINK
Share on social media

Share access to this article

Sharing links are not relevant where the article is open access and not available if you do not have a subscription.

For more information view the Sage Journals article sharing page.

Information, rights and permissions

Information

Published In

Article first published online: January 1, 2009
Issue published: January 2009

Rights and permissions

© 2009 National Academy of Sciences.
Request permissions for this article.

Authors

Affiliations

Sungho Kim
State Materials Office, Florida Department of Transportation, 5007 Northeast 39th Avenue, Gainesville, FL 32609.
Gregory A. Sholar
State Materials Office, Florida Department of Transportation, 5007 Northeast 39th Avenue, Gainesville, FL 32609.
Thomas Byron
State Materials Office, Florida Department of Transportation, 5007 Northeast 39th Avenue, Gainesville, FL 32609.
Jaeseung Kim
National Center for Asphalt Technology, 277 Technology Parkway, Auburn, AL 36830.

Notes

Metrics and citations

Metrics

Journals metrics

This article was published in Transportation Research Record: Journal of the Transportation Research Board.

VIEW ALL JOURNAL METRICS

Article usage*

Total views and downloads: 255

*Article usage tracking started in December 2016


Altmetric

See the impact this article is making through the number of times it’s been read, and the Altmetric Score.
Learn more about the Altmetric Scores



Articles citing this one

Receive email alerts when this article is cited

Web of Science: 0

Crossref: 47

  1. Predict high and low temperature true grade of reclaimed asphalt pavem...
    Go to citation Crossref Google Scholar
  2. Dilauryl thiodipropionate as a regeneration agent for reclaimed asphal...
    Go to citation Crossref Google Scholar
  3. Viscoelasticity of Recycled Asphalt Mixtures with High Content Reclaim...
    Go to citation Crossref Google Scholar
  4. Evaluation of performance of hot mix asphalt contained various sizes o...
    Go to citation Crossref Google Scholar
  5. A comprehensive review on the usage of nanomaterials in asphalt mixes
    Go to citation Crossref Google Scholar
  6. Thermal cracking in cold regions’ asphalt mixtures prepared using high...
    Go to citation Crossref Google Scholar
  7. Study on Low-Temperature and Fatigue Performance of High RAP Content H...
    Go to citation Crossref Google Scholar
  8. Development of characteristic-based guidelines to determine maximum al...
    Go to citation Crossref Google Scholar
  9. Effect of reclaimed asphalt pavement on cracking performance of asphal...
    Go to citation Crossref Google Scholar
  10. Thermal, chemical and rheological properties of asphalt binders extrac...
    Go to citation Crossref Google Scholar
  11. Investigation into possibility of rejuvenating aged asphalt binder usi...
    Go to citation Crossref Google Scholar
  12. Experimental, analytical, and analogical study of the effect of RAP ex...
    Go to citation Crossref Google Scholar
  13. Investigation of the oxidation ageing of RAP asphalt blend binders and...
    Go to citation Crossref Google Scholar
  14. Research on the influence of RAP and aged asphalt on the performance o...
    Go to citation Crossref Google Scholar
  15. Performance-based design of recycled hot-mix asphalt (HMA) incorporati...
    Go to citation Crossref Google Scholar
  16. Effect of rejuvenator type and dosage on rheological properties of sho...
    Go to citation Crossref Google Scholar
  17. Strategies to improve performance of reclaimed asphalt pavement-recycl...
    Go to citation Crossref Google Scholar
  18. High-Temperature Rutting Resistance of Inverted Asphalt Pavement Struc...
    Go to citation Crossref Google Scholar
  19. Approach for Determination of Maximum Reclaimed Asphalt Pavement Conte...
    Go to citation Crossref Google Scholar
  20. Utilizing of waste polymer modified bitumen in combination with rejuve...
    Go to citation Crossref Google Scholar
  21. Waste cooking oil as an asphalt rejuvenator: A state-of-the-art review
    Go to citation Crossref Google Scholar
  22. Use of reclaimed asphalt pavement – necessity and innovation
    Go to citation Crossref Google Scholar
  23. Effect of recycled asphalt binder on high and intermediate temperature...
    Go to citation Crossref Google Scholar
  24. Effects of Additive Materials on Indirect Tensile Strength and Moistur...
    Go to citation Crossref Google Scholar
  25. Laboratory Investigation on the Use of Bamboo Fiber in Asphalt Mixture...
    Go to citation Crossref Google Scholar
  26. Application of different modifiers for improvement of chemical charact...
    Go to citation Crossref Google Scholar
  27. Rutting and fatigue cracking performance of SBS-RAP blended binders wi...
    Go to citation Crossref Google Scholar
  28. A review on the mechanisms involved in reclaimed asphalt pavement
    Go to citation Crossref Google Scholar
  29. Evaluation of fatigue behavior of asphalt binders containing reclaimed...
    Go to citation Crossref Google Scholar
  30. Cracking performance characterisation of asphalt mixtures containing r...
    Go to citation Crossref Google Scholar
  31. Evaluation of fatigue behavior of high reclaimed asphalt binder mixes ...
    Go to citation Crossref Google Scholar
  32. Physical and rheological evaluation of aging behaviors of SBS modified...
    Go to citation Crossref Google Scholar
  33. Nonrecoverable Compliance and Recovery Behavior of Polymer-Modified an...
    Go to citation Crossref Google Scholar
  34. Life cycle assessment of road construction alternative materials: A li...
    Go to citation Crossref Google Scholar
  35. Performance Evaluation of Polymer-Modified Binder Containing Reclaimed...
    Go to citation Crossref Google Scholar
  36. An Investigation into the Continuous High-Temperature Grade and Elasti...
    Go to citation Crossref Google Scholar
  37. Rutting Susceptibility of Asphalt Mixes with High RAP Content Using Rh...
    Go to citation Crossref Google Scholar
  38. Evaluation of cracking performance for polymer-modified asphalt mixtur...
    Go to citation Crossref Google Scholar
  39. Organic Polymers Stabilized Crushed Stone Based on Vertical Vibration ...
    Go to citation Crossref Google Scholar
  40. Investigation of rheological properties and Superpave PG of PMB mixed ...
    Go to citation Crossref Google Scholar
  41. Effect of organic layered silicate on microstructures and aging proper...
    Go to citation Crossref Google Scholar
  42. Hybrid life cycle assessment for asphalt mixtures with high RAP conten...
    Go to citation Crossref Google Scholar
  43. Study of bitumen crystallization by temperature-modulated differential...
    Go to citation Crossref Google Scholar
  44. Achieving Desired Volumetrics and Performance for Mixtures with High P...
    Go to citation Crossref Google Scholar
  45. Thermal Cracking Potential in Asphalt Mixtures with High RAP Contents
    Go to citation Crossref Google Scholar
  46. Using Life Cycle Assessment to Optimize Pavement Crack-Mitigation
    Go to citation Crossref Google Scholar
  47. Fatigue and Stiffness Evaluations of Reclaimed Asphalt Pavement in Hot...
    Go to citation Crossref Google Scholar

Figures and tables

Figures & Media

Tables

View Options

Get access

Access options

If you have access to journal content via a personal subscription, university, library, employer or society, select from the options below:


Alternatively, view purchase options below:

Purchase 24 hour online access to view and download content.

Access journal content via a DeepDyve subscription or find out more about this option.

View options

PDF/ePub

View PDF/ePub